Kalmar Dual Fuel Forklifts Arlington

In the majority of situations, most people spend quite a bit of money buying their forklift. Hence, it is extremely important to take good care of it so as to protect your investment well into the long run. It is really a great idea to know the procedures that are undertaken in the maintenance and care of this piece of equipment.



By starting up the forklift and listening carefully how it runs is one of the best ways to tell how good the engine is performing. For instance, if there are any misses or knocks, the equipment is faulty and this must raise some concerns. Also listen closely for any squealing sounds which come from the belts since these noises will provide you with a lot of information.



Several of the main parts requiring attention during maintenance include the gauges, horn, safety warning devices, the overhead guard and the lights. Any burnt out light bulbs or faulty parts have to be replaced as soon as they are noticed. It is also imperative to inspect the wiring.



The battery compartment terminals must be cleaned when the above parts have been inspected carefully. If the terminals are not clean, be sure to clean them properly. Each battery cell must be inspected so as to make certain that the fill level is topped up to the regulated amount.



An oil change is the next step to drain all the oil out of the machine and then change the filters. The hydraulic filter, the transmission filter and the fuel filters have to be replaced on a regular basis. Prior to fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.



When the oil change has been completed and new filters have been fitted, visually inspect the drive axle from beneath the equipment. Be sure to grease the axle if there is any grease fitting. Inspect the belts on the engine for any frays or cracks. If you find any, fix the issue accordingly. Next, inspect every other part of the equipment like the wheels. If any type of fault or problem is detected, be certain to address it immediately in order to make sure the machine is running at its safest and optimum levels.

• MEC Scissor Lifts Arlington
  Safety Requirements for Scissor Lifts Scissor lift machinery are known as "moveable scaffolds," according to the OSHA. These industrial machines are capable of lifting heavy and large loads that are balanced well. They are responsible... More
• Doosan Dual Fuel Forklifts Arlington
  Basic Training Information for LPG Liquid petroleum gas or LPG is a odorless and colorless fuel derived from natural gas. LPG consists of 90% propane. It is extracted in a process referred to as distilling.... More
• Mitsubishi Counterbalance Forklifts Arlington
  Unfortunately, industrial accidents and injuries at construction sites are extremely common and occur more often than anybody would prefer. According to statistics, a huge majority of these mishaps occur because of inadequate or wholly absent... More
• Terex Reach Stackers Arlington
  The Reach Stackers made by Terex are economical in operation. These units have been meticulously designed and engineered to suit the needs of a diverse customer base. The Reach Stacker range is more flexible than... More
• Wolff Tower Cranes Arlington
  During 1861, the company Harland and Wolff was formed. Mr. Gustav Wilhelm Wolff, born in Hamburg in 1834, along with Mr. Edward James Harland born during 1831, formed the business. In 1858 Harland, who was... More